1.Importer PET material
2.High scratch resistance
3.UV cut and 95% light transmittance
4.Removable, durable, reusable, was

Transparent  Features:

1.clearly, ultra thin and durable.
2.Shield to protect your screen from unwanted scratches.
3.High quality Taiwan PET material.
4.Hard surface coat reaches 3H.
5.95% of light are allowed to transmit
6.Protect your eyes by blocking 99% of ultraviolet rays.
7.Preserves original screen appearance exactly, reduces smudging and fingering friction.
8.The ultra-thin film is light

9. Strong static adsorption, can be effectively seated with screen, perfect 6-colours, beautiful seamless.

10. Good in exhaust, can effectively discharge the bubble made during operation process.

11. High surface hardening treatment, abrasion resistance scrape
12.Easy to remove, no residue after being removed

Installation Methods:

Step 1 Check Film Size

Clean both hands and lcd screen and adjust the location where the film would be on the lcd procedure (Please arrange the film to the center of lcd before you take off all vinyl out of the hard film )

Step 2. Clean LCD

Clean the LCD with cleaner and micro fiber cloth included. If there is a dust left on the lcd, that can cause a bubble. Apply cleaner on the cloth ,not on lcd.

Step3. Film Installtion

Take off 1/3 of back PET and begin to apply it on the area you desire on lcd. Take off the rest of back PET as your fully attach the film. Result may vary upon installation.

Step4,Remove bubble with a Squeeze

Remove bubbles by using squeeze included with the film, If you see bubbles after installation, lift up with film with a tape and re-attach it or slide the bubble to the sides very slowly and carefully with a squeeze.